ARB SIMPSON II ROOFTOP TENT
There is no need fill your limited cargo space with tents, air mattresses and sleeping bags when you can carry an ARB Simpson II tent on the roof of your vehicle. You can have your bed already made, and with the simple clamshell style design, your accommodations can be flipped open and ready for sleeping in minutes. The ARB Simpson II easily mounts on your roof rack and provides a hint of luxury on the trail. Furnished with a 2 1/2 inch high-density foam mattress complete with a removable cover, that is larger than a queen-sized bed which is just under eight feet in length. There is plenty of space for two people, store all your gear and have over four feet of headroom when open. Manufactured from high quality poly-cotton, it is waterproof, breathable and resistant to mold. An aluminum framed base reduces weight and insulates against cold weather. A raised fly-sheet keeps the tent cooler in the sun and reduces condensation in the cold - ideal in any weather. Supported awnings permit the windows to be opened during rain and screens on the doors and windows will keep the insects out. Access is by a retractable aluminum ladder. With no sharp edges, the ladder rungs are made for use with bare feet. The mounting system requires no drilling on roof rack or bars so it can be installed and easily removed when not in use. It folds down to packed height of 12 inches for minimal wind resistance. There are also many accessories available including awnings and annexes for additional enclosed outdoor space. To order call 800-284-9840.
ARB Touring Roof Tent Simpson II - P#ARB101 $1282.99 EA
ARB Touring Awning - P# ARB108 $310.99 EA
NEW MAC EDGE(tm) 12 PC MM SOCKET SET AVAILABLE IN 1/4 INCH DRIVE
Mac Tools has introduced the new Mac Edge 12 pc 1/4-inch drive Non-Slip MM Socket Set. The drive set includes a full size range from 5mm to 15mm, including 5.5mm, and joins the 3/8 inch and 1/2 inch drive Mac Edge sockets previously offered. Constructed of chrome molybdenum steel, the patented design allows sockets to be compatible with both normal and damaged fasteners. These sockets exceed ANSI, BS and DIN performance specifications. Capable of driving damaged fasteners that have been rounded up to 70%. Check out www.mactools.com for more info.
XTREME CHARGE ADDS NEW LIFE CYCLES TO 12-V BATTERIES
Xtreme Charge is a 12-volt maintenance charger that provides owners of motorcycles and off-road vehicles with an advanced charging system. The unique, new charge algorithm built into the charger, coupled with advanced battery evaluation capabilities and a patented high-frequency PULSE circuitry, optimizes the performance of any 12-volt lead-acid battery.
Xtreme Charge highlights include:
Intelligent testing and evaluation circuitry featuring 12 LED status indicators.
A proprietary computer-integrated system that determines and delivers the appropriate and safe amount of charge from .1A to 2.5A depending on the condition of the battery. It does this by evaluating both voltage and amperage simultaneously (an industry first).
A unique and patented PULSE technology that minimizes the size of sulfation buildup on battery plates (the reason why 80 percent of all batteries die).
The Xtreme Charge works with all types and sizes of 12-volt lead-acid batteries including flooded, fill and charge, gel, AGM and maintenance free (from less than 10 Ah to over 150 Ah). Xtreme Charge includes the charger unit, fuse-protected quick-disconnect battery clamps and lugs, safety instructions and a quick-start guide. Check out www.xtremechargers.com.
BODY ARMOR FJ BUMPER
This unique replacement bumper has a rugged, clean look, and handles most trail applications. It's formed from 3/16" solid sheet aluminum, welded to a 2"x3/16" wall tube-frame with an integral 1/2" 6061 T-6 winch mount plate, and 2"x3/16" wall center hoop with 1.5"x3/16" wall brushguards. Shackle mounts are welded into the frame-mounting system and black "D" rings are included. A fairlead opening cover-plate to bolt in place of roller fairlead gives the bumper a smooth OEM appearance. It's available with or without two pair of PIAA 004XT Light kits, and comes in either black or silver. From $1138.99 EA
View a complete listing of Body Armor Products online, or call 800-284-9840.
AEM BRUTE FORCE INTAKE SYSTEMS NOW AVAILABLE FOR THE 2007 TOYOTA FJ CRUISER
AEM Brute Force claims their intakes are dyno-tested against their competition to deliver more torque and horsepower than every comparable intake system on the market. They tune each system right on the vehicle to deliver maximum torque and horsepower at every throttle position, and monitor OBDII sensors during this process to eliminate the chance of throwing a check engine light. Dyno results for all Brute Force applications are available on www.aempower.com. All AEM intakes are constructed of CNC, mandrel-bent 6061 aluminum, and feature reinforced, TIG-welded brackets and fittings for durability. A heavy-duty steel heat shield with a mirror- polished or silver powder coated finish, complete hardware kit and comprehensive installation instructions are included. All intakes include AEM's DRYFLOW synthetic performance air filter, which is the first cleanable, reusable performance air filter that does not require oiling the filter to trap dirt and contaminants. The intake systems carry a limited lifetime warranty and are made in the U.S.A. $294.99 KIT
Purchase an AEM Intake online, or call 800-284-9840.
PRO COMP SUSPENSION OFFERS A 2-INCH SUSPENSION LIFT FOR THE 2008 FORD SUPER DUTY.
A 2" lift system is now available to fit up to 35" tires. It features a front track bar relocation bracket to maintain proper lateral axle alignment, adjustable MX6 monotube shocks which allow tailoring of ride comfort, solid billet front coil spring spacers to increase the ride height and solid billet 1.5" blocks to lift the rear. $722.99 KIT
View a complete listing of Pro Comp Suspension Lift Kits online, or call 800-284-9840.
BULLY DOG DOWNLOADERS NOW AVAILABLE FOR ALL OF THE NEW GM-LLM, DODGE 6.7 & FORD 6.4 DIESEL ENGINES
Released for the new 2007 diesel engines that hit the market earlier this year from Chevrolet/GM, Dodge and Ford; the Power Pup Downloader provides additional power, performance, fuel economy and safety all in one package. They feature a wide variety of power settings ranging from "Tow Mode," designed specifically to achieve optimum performance while towing a trailer or fifth wheel, to the high performance "Extreme" setting designed for ultimate performance. In addition to added power, performance and fuel economy, the Triple Dog features a number of valuable tools such as a Diagnostic Trouble Code reader and the ability to adjust the factory speedometer for larger aftermarket wheels and tires.
GM LMM (P# 43569) $551.99
Dodge 6.7 (P# 42573) $551.99
Ford 6.4 (P# 41562) $551.99
View a complete listing of Bully Dog Downloaders online, or call 800-284-9840.
HUSHMAT ULTRA H2O
HushMat manufacturers a full line of vibration damping, thermal insulation, tape and sound absorption materials for the automotive aftermarket, and has just released Ultra H2O(tm). It's a waterbased technology formulated to dampen vibration in hard to reach areas. Uses include the inside of outer door skins, behind door frames, the inside of quarter panel skins, between roof bows and roof skin and between trunk frames and trunk skin. It's also designed to seal body panel seams and joints, and will work well for sealing sub woofer enclosures. Ultra H2O comes in two sizes - a caulk tube that fits any standard caulking gun and includes the HushMat EZ squeeze screw on nozzle. This provides a consistent 1" by 1.5mm bead. Or it's available in a 5-gallon pail, and can be thinned with water and sprayed using compressed air equipment. The stuff cures in 3 hours or less in ambient conditions. It maintains its flexibility and can be painted and sanded when cured. Clean up of equipment and nozzles is simple and easy using water prior to cure. Ultra H20 also has no "overspray" problems, and requires no environmental air ventilation. Check out www.hushmat.com.
MILE MARKER SX9.5 M.O.S.F.E.T. CONTROL TECHNOLOGY
Mile Marker's SX9.5 electric winch system features the latest solid state M.O.S.F.E.T. Control Technology. An illuminated, waterproof control box contains built in, wireless control technology, and comes with a wired, 12-foot L.E.D. hand control as well. The illuminated control offers crucial safety warnings and performance status. The SX9.5 also features an Automatic Shutdown feature for Over Operating Temperature and Low Battery Voltage (with a manual override). Powered by a heavy duty series wound motor, the SX9.5 is rated at 9500 pounds of pulling power. P# 76-52146 - $758.99
Purchase the Mile Marker SX9.5 Winch or view a complete listing of Mile Marker winches and winch accessories online, or call 800-284-9840.
THOMSON DELMAR LEARNING CHILTON(r)TOTAL CAR CARE DVD
This new DVD picks up where the existing Total Car Care DVD Series left off by covering model years 2000- 2005. The existing series covers model years 1981-2000. Upon purchasing the DVD, you will be provided with a standard code that provides access to information for the one vehicle you choose, just like an individual manual. This convenient format provides a permanent reference tool. View exactly what you need on your computer screen, or print it out. The Chilton DVD covers a wide range of 2000-2005 domestic cars, light trucks, vans, and SUVs. It provides step-by-step service and repair procedures, general information and maintenance, engine performance and tune-up, and engine mechanical and overhaul, engine electrical systems, and heating and air conditioning. Check out www.Books4Cars.com.
DYNOMAX WELDED EXHAUST SYSTEM FOR NEW 2007 CHEVY SILVERADO 1500 & GMC SIERRA 1500 TRUCKS
This all-new system (which you can hear live at www.dynomax. com in the new products section), posted nine additional horsepower at 3,400 RPM while delivering 13 additional ft/lbs of torque in recent dyno testing. It's made from all-aluminized coated 16-gauge, 3-in. steel tubing. This single exhaust style system fits '07 Silverado/Sierra 1500 truck models (excluding '07 Classic models) with extended cabs and standard beds or crew cabs with the short bed. Each system includes a 100- percent-aluminized DynoMax Ultra Flo(tm) welded performance muffler that features a straight-through design delivering an aggressive performance tone with minimal resonation. A polished, buffed, 4-in. 304 stainless steel tip is etched with the DynoMax logo and exits in the location of the stock tailpipe. Each kit is engineered for a fast, trouble-free installation with OE-matched hanger locations and includes all necessary clamps.
Reg. Cab Short Bed - (P#19451) $350.99
Reg. Cab Long Bed - (P#19452) $350.99
Ext. Cab Short Bed - (P#19453) $350.99
Ext. Cab Long Bed - (P#19455) $350.99
Crew Cab Short Bed - (P#19454) $350.99
Purchase a Dynomax Exhaust System or view a full listing of Dynomax Exhaust Parts online, or call 800-284-9840.
FABTECH 2007 GM K1500 PICK UP 6" PERFORMANCE SYSTEM
Fabtech has a 6-inch suspension lift for the new 2007 GM K1500 trucks. The enhanced ride height will properly clear 35" tall tires. Extensive design work was given to the extended length steering knuckles to keep the track width near stock, providing a tight turning radius for great maneuverability. It has been designed to work properly with factory GM Stablitrac models without computer reprogramming. The lower control arm crossmembers are strengthened with cross tubes backed up by tubular frame struts that distribute front suspension impact loads. The front differential is protected with a 1/ 4" thick steel skid plate. The rear suspension is lifted with a block and an add-a-leaf system. The Performance version of the kit includes either Fabtech's Dirt Logic 2.5 or 4.0 Adjustable Coilover shocks in place of the factory front coilover assembly. A base system provides the six inches of lift but utilizes the stock coilover front shocks.
Basic Kit - $1562.99
Performance Kit w/ 2.5 Dirt Logic - $2595.99
Peformance Kit w/4.0 Dirt logic - $3071.99
View a complete listing of Fabtech suspension lift kits and Fabtech lift kit parts online, or call 800-284-9840.
WARN INDUSTRIES' HANDHELD ELECTRIC PULLING AND LIFTING TOOL - THE PULLZALL(tm) PORTABLE POWER TOOL
This tool can replace the old-fashioned come-a-long and chain fall, and will take the labor out of pulling and lifting heavy objects. Whether you're working at a jobsite, in the field, or in the garage, the PullzAll can change the way you move things. A powerful, lightweight, easy-to-use handheld electric tool, it has the ability to lift or pull up to 1,000 lbs. Its motor has a variable speed control allowing you to move heavy items into place smoothly and precisely. Changing from forward to reverse motion is as easy as pushing a button. This allows easy positioning and a brake system that'll securely hold your item in place where you want it. Up to 15' of 7/32" wire rope is available and is equipped with an industrial- grade rigging hook. The PullzAll is available as either a 110-volt AC tool, or a cordless 24-volt DC unit with two rechargeable NiMH battery packs and a rapid charger. To order call 800-284-9840.
KC FRONT END LITE BAR FOR 2007 TOYOTA FJ CRUISER
Featuring a sleek hoop style design that matches the contour of the FJ front end, the new Lite Bar is easy to install by simply bolting it to existing factory holes. They are available in a choice of textured black or a bright "chrome look" powder coat finish. Light tabs for mounting two lights are included and will fit KC's eight inch diameter Rally 800s. All KC Lite Bars are backed by KC's famous 23 year warranty and are UPS shippable. To order call 800-284-9840. #7453 - $295.99
Purchase a KC Front Lite Bar or view a complete listing of KC Parts online, or call 800-284-9840.
PRO COMP 2007 GMT 900 SILVERADO / SIERRA 4X4 PICKUP 6" SUSPENSION SYSTEMS
Pro Comp Suspension's latest Stage II 6" systems for the new GMT 900 Silverado offers exceptional ride comfort and handling with available MX 2.75c Series coil over front shocks and MX6 adjustable rear shocks. Easy to install one-piece cross members and high strength extended steering knuckles retain the factory steering geometry and alignment specifications. Approximate installation time for the complete suspension system is only 4-6 hours. 6"of lift can fit 35"x12.50" tires on 17"-20" diameter rims with up to 5" backspacing. The P/N 51017BMX System is available for demanding drivers who want the capability of extended high speed 4WD operation. It includes differential mounts that position the front differential at the correct angle to accommodate a special, included, CV front driveshaft. Stage I systems with ES9000 rear shocks and just a spacer for the factory front struts retain the factory ride quality. $2795.99
View a complete listing of Pro Comp Suspension Lift Kits online, or call 800-284-9840.
VIAIR EXTREME ONBOARD AIR
VIAIR's new Dual Onboard Air Systems (P/N 10008 Super Duty - 33% Duty Cycle, 3.21 CFM & P/N 10009 X'Treme Duty - 100% Duty Cycle, 2.68 CFM), make installing an onboard air system simple and efficient by including everything you need in one box. With dual compressors, the refresh rate of the tank is lightning fast and enough flow is available to run air tools on demand. Dual Onboard Air Systems come with a tire inflation gun, a 200 PSI inline pressure regulator (for air lockers) and a versatile blow gun. You can air up tires on the trail with ease or perform roadside repairs using air tools. Each system has dual compressors, a 2- gallon (six-port) air tank, pneumatic fittings, pressure switch, electrical relays and all wiring, a dash panel monitor, plus all required hardware and detailed instructions for an easy install.
P/N 10008 Super Duty - $556.99
P/N 10009 X'Treme Duty - $600.99
View a complete listing of ViAir Portable Air Compressors online, or call 800-284-9840.
EAGLE ONE ONE-STEP TIRE DETAILER
There is a faster, easier way to keep your tires shiny without a mess with Eagle One Tire Detailer. Eagle One's gel formula, achieves a high-gloss, long-lasting shine that lasts up to twice as long as trigger sprays and only takes minutes to apply. Application is achieved by squeezing the ergonomically- shaped bottle to saturate a foam applicator with the gel formula. Then, apply the applicator directly to your tires - no more spraying and rubbing, and no more rags to throw away. One bottle will dress up to 40 car tires. For a fast and easy one-step cleaning prep before Tire Detailer is applied, consider Eagle One All Wheel & Tire Cleaner, a powerful 2-in-1 foaming cleaner that quickly and easily removes dirt and brake dust from both the tires and wheels. Check out www.eagleone.com.
CARRIAGE WORKS BILLET GRILLE INSERT FOR THE NEWLY RESTYLED 2007 DODGE DURANGO
This grille insert is a replacement for the OE grille and installs using simple hand tools with no cutting required. It's a onepiece design that allows for a simple installation and a smooth finished appearance. Like all Carriage Works grilles, this Durango grille is machined in the USA from 6061-T6 solid bar stock and TIG welded or robotically MIG welded in a CAD designed, CNC-milled fixture. This detail insures an exact fit with aerospace tolerances. Polished (P#43832) $154.99
Purchase a Carriage Works Billet Grille online, or call 800-284-9840.
FLEETWOOD 2008 TIOGA RANGER AND JAMBOREE SPORT CLASS C MOTOR HOMES
Fleetwood RV has launched their new 2008 Tioga Ranger and Jamboree Sport value-priced Class C motor homes. These full-feature motor homes are Fleetwood's first Class C machines. They feature four floor plan offerings, ranging from 25 to 31 feet and offer flexibility and convenience to accommodate a variety of sleeping capacity needs. The interior designs create ample space with 82" interior ceiling heights, tall overhead bunks with room to sit-up, and multiple lighted pass-thru storage compartments. Standard features include raised-panel hardwood cabinet doors, fully appointed bathroom with residential-style sink and faucet. A roomy kitchen with large stainless steel galley sink, three-burner stove with oven and a microwave is also standard. A 19" LCD widescreen color television is available as an option. Exterior construction includes a one-piece molded fiberglass front-end cap, high-gloss fiberglass sidewalls, and steel, powder-coated running boards and rear bumper. They are backed by Fleetwood's one year bumper-to-bumper warranty. Check out www.fleetwoodrv.com.
LET'S GO AERO GEARWAGON 125 SPORT PERFORMANCE TRAILER
The GearWagon 125 provides 125 cubic-feet of cargo carrying capacity for hauling everything from bicycles, motorcycles and ATVs to camping equipment, sporting gear and lawn and garden tools. This modular designed trailer is available in two modes: as an open pickup bed with load bearing and removable end gate; or as a fully-enclosed carrier utilizing a high-capacity, high-utility TwinRunner(tm) lid set which keeps your cargo dry, secure and out-of-sight. Think of the GearWagon 125 as a pickup bed and can do everything a Toyota Tacoma or Chevrolet S-10 pickup bed can do and more! It can carry an ATV or an ATV can pull it. With the ATV removed for exploring, the trailer becomes a bed for sleeping at base camp. With the addition of the TwinRunner lid set, all your gear is out of sight and out of the elements. It can be a place to store all your weekend warrior equipment. As an enclosed trailer, the GearWagon 125 measures 93-inches in length by 60-inches wide by 51-inches high. It features a twin-wall, rotationally molded, polyethylene base that is durable and withstands constant use and abuse from all types of cargo. 13" wheels and tires and a torsion axle provide shock absorption and independent wheel suspension for a good ride. Also featured is LGA's patented Hardpoint(tm) C-channel Gear Management System, which consists of infinitely insertable and adjustable spring nut attachment points contained within a flexible channel system to create limitless options for securing gear management hardware - including cargo tie-downs, bicycle mounts and spare tire carriers. Check out www.letsgoaero.com..
LOGGERHEAD TOOLS PRO-GEAR LINE OF PROFESSIONAL-GRADE TOOLS
The first tools in this series are the Bionic Wrench(tm) and Bionic Grip(tm) hand tools. Both feature an Interlock(tm) mechanism that stays engaged while under torque load and a nickel finish for added corrosion-resistance and durability. Like all LoggerHead Tools products, they are made in America and guaranteed for life. Both the Pro-Gear Bionic Wrench and Bionic Grip are different than traditional wrenches or pliers because they actively distribute force around the sides of nuts and bolts instead of just the corners. The Bionic Wrench(tm) has a closed head and six smooth jaws that converge on all sides of a nut or bolt when the handle is squeezed. The Bionic Grip has an open head and four serrated jaws that grab the curved surface of a pipe or flats of a fastener, distributing force over 240 degrees. This symmetrical grip is less likely to distort softer materials, such as copper, plastic and brass pipes. For both tools, the Interlock(tm) mechanism engages onto the work, stays locked while under torque load and disengages only when the force is removed. Both tools feature ergonomic designs and offer simple adjustability without external locks or knobs. They are available in 6-, 8- and 10-inch sizes. The Bionic Wrench covers 38 sizes of fasteners; and the Bionic Grip covers 35 sizes of fasteners as well as pipes and tubes from 5/16 to 1-1/4 (outer diameter), greatly reducing the need to find the exact size wrench for a given job. Check out www.loggerhead.com.
