SMITTYBILT XRC-8,000 LBS.
(1-Smittybilt XRC8 Winch image.tif)
This winch features a 4.1 HP permanent magnetic motor and a planetary gear reduction system with 265:1 gear ratio for power and reliability. Additional product specs: motor: 4.1 hp; 5/16" (7.94 mm) x 92' galvanized aircraft cable with replaceable hook; mounting bolt pattern: 10" x 4.5; overall dimensions 21" x 6.22" x 7.283". Total shipping weight: 80 lbs (36 kg). To order call 800-284-9840.
PN 97280 $299.99
MILE MARKER HYDRAULICS
(1-Mile Marker Winch H10500 image.tif)
This system uses a vehicle's OEM power steering pump rather than battery power. Rigorous testing has enabled them to create a continuous-duty recovery system without battery drain that's functional submerged in water and covered in mud. The US Army uses it as the primary self-recovery outfitter for HMMWV (Hummer) and other tactical vehicles worldwide. The system features a 10,500 lbs. continuous duty cycle hydraulic motor and requires use of the vehicle's specific 34 series valve adapter kit for the power steering system. To order call 800-284-9840.
PN 75-50050C $1115.99
SMITTYBILT XRC 10
(xrc10winch.jpg)
The all new 10,000 lb winch has a state of the art 5.5 HP Series Wound Motor that offers durability, overheat recovery, and a 3 stage planetary gear reduction system with a 218:1 gear ratio to deliver the muscle you need to get you out of any situation. All of winches come complete with roller fairlead, remote control, cable and hook, and solenoid box. To order call 800-284-9840.
PN 97210 $499.99
SUPERWINCH'S HEAVY-DUTY EP + EPI
(1-Superwinch EPi 9.0 Series Winch With Pulley image.tif)
These winches provide efficient and powerful pulling, and they're offered in both integrated and non-integrated switching configurations for versatile installation. The EP6.0 comes with a 3.6 hp series-wound motor with a rated line pull of 6,000 lbs., and 80 feet of 5/16" diameter galvanized wire rope. The EP9.0 and EPi9.0 come with 4.6 hp series-wound motors with rated line pulls of 9,000 lbs., and 125 feet of 5/16" diameter galvanized wire rope. All EP and EPi winches feature reliable, sealed switching solenoids, power-in/out operation, and include a free-spooling drum, efficient three-stage planetary gearbox, auto mechanical brake, roller fairlead and pulley block, forged hook with safety latch, hand saver, battery cables with terminals, and come in either 12 or 24 volt configurations. Installation's quick with only 2 wires to connect. Solenoids on EP units are pre-mounted to the winch motor but can be easily mounted remotely. EPi units have fully integrated solenoids for easy installation. All models include newly designed rugged rubber handheld remotes for operation up to 30' away. To order call 800-284-9840. FROM $629.99
T-MAXX WINCH ROCKCRAWLER
(1-T-MAX Competition Series 9000 image.tif)
Their newest Competition Series wireless winch is available in either a 6,500lbs. or 9,000lbs. capacity--in bold bright yellow powder coat. The 6,500 lbs. winch is packaged together with a bright polished aluminum Hawse fairlead and 80' of 14,500 lbs. yellow synthetic line with a heavy duty sling hook for a complete "ready to go" experience. It's assembled with a short drum for lightweight operation (55lbs.). The 9,000 lbs. winch is equipped with a 6.6hp series wound motor for lower electrical draw and high torque (the 9,000 lbs. model does not include the Hawse fairlead or synthetic rope). The 6,500 lbs. has a 5.5hp series wound motor that's high for its size. Their ZST wireless technology is standard in both. To order call 800-284-9840.
6,500 lbs. Competition Winch: PN 12212 $749.99
9,000 lbs. Competition Winch: PN 12213 $799.99
WARN POWERPLANT DUAL FORCE
(1-WARN PowerPlant Dual Force image.tif)
These award-winning vehicle-mounted multi-tools integrate a premium air compressor with either a 9,500 lbs. (HP) or 12,000 lbs. (HD) winch for the best versatility in a single unit. The air compressor has a high air flow rating of 12 CFM @ 0 PSI and 5 CFM @ 90 PSI with a 100 PSI max air pressure, and a shut-off switch that automatically turns it off when max pressure is reached. The HP series winch features a 125' 5/16" wire rope, and is perfect for off-road enthusiasts. For more intense industrial applications, Warn offers the HD version with an 80' 3/8" wire rope that is better suited for contractors and farmers who use bigger trucks. Both models feature thermometric protection to protect against overheating, remotes with 12' leads and integrated thermometric LED indicators, 3-stage planetary reduction gears, powerful brakes, and more. Both include 25' of coiled nylon hose; tire inflators, quick-connect couplers, and dual air chuck. To order call 800-284-9840.
Powerplant HP: PN 71800 $1464.99
Powerplant HD: PN 71801 $1464.99
MILE MARKER LOW PROFILE PE8000
(2-Mile Marker Low Profile PE8000 image.tif0
This electric winch system offers solid-state M.O.S.F.E.T. control technology in an IP65 waterproof control box with a heavy-duty permanent magnet motor, plus a wired 12' L.E.D. illuminated hand control. These offer the user crucial safety warnings and performance status. The unit also features an auto shutdown feature for to prevent overheating, and lineout delay warnings. To order call 800-284-9840. PN 76-50240 $349.99
T-MAXX WINCH OUTBACK SERIES
(2-T-MAX Outback Series 15,000 image.tif)
These are available in 9,000, 10,000, 12,500 and 15,000 lbs. capacities. What sets them apart is the wireless controller that eliminates the solenoids and replaces them with a 100% solid state, proprietary system that operates up to 200' distance. It features an ergonomic "joystick" control, unlike other basic key fob designs. Their series wound motors are approximately 20% more powerful, which means much less draw on your electrical system, more torque, and less heat produced for longer life. All gearing is made of heat-treated, machined steel: If it moves, it's on bearings-- no bushings allowed. To order call 800-284-9840. FROM $749.99
WARN WORKS(r) PULLZALL
(2-WARN Works PullzAll image.tif)
Say goodbye to the old-fashioned come-a-long and chain fall: This electric hand-held pulling and lifting tool takes the effort out of moving heavy objects. It can lift or pull up to 1,000 lbs. and weighs only 15 lbs. It features a trigger-operated variable speed control for precise lifting or pulling. The unit's braking system holds the full-rated load and the LED load indicator provides excellent operator feedback. With 15' of wire rope, hook with clasp, and a swiveling anchor hook, it's great for a variety of tasks including hoisting engines, moving heavy machinery around the shop, construction and more. The unit is available in corded 110V or cordless 24V NiMH versions. To order call 800-284-9840.
PN 685000 $237.99
MILE MARKER SI 9500:
(3-Mile Marker SI9500 Winch System image.tif)
This electric winch system boasts a 4.8 hp series wound motor and 212:1 gear ratio, making it ready to recover you from any mess you can put yourself in. Its one-piece, integrated solenoid design provides a hassle free setup and finished look to your trail ready vehicle's front. Featuring 100 feet of 3/8" cable and the strength of their automatic load holding brake system, combined with the uncompromised construction of heat-treated steel gears and a hardened drum, it provides an unmatched value. To order call 800-284-9840. PN 76-50147 $549.99
WARN 9.5TI SELF-RECOVERY
(3-WARN 9.5ti Self-Recovery Winch image.tif)
This winch stuffs 9,500 lbs. of pulling power into a compact 12.5 lbs. die-cast aluminum body, which offers excellent protection to the sophisticated electronics within. It provides unique operator feedback through a thermometric indicator, which gives info about motor temperature during the winching process. For unrivaled resistance against the elements, it features extreme sealing. Add to this a Gen II Series-Wound motor for an excellent combination of torque and speed, and you've got a truly athletic product. To order call 800-284-9840.
PN 67550 $1183.99
HI-LIFT(r) X-TREME JACK
(Xtreme Jack 1.jpgXtreme Jack 2.jpg
Xtreme Jack Top Clamp.jpg)
Designed for off-roaders, farmers and ranchers, it's also ideal for fire & rescue workers as a back-up tool for "Jaws of Life". The top of the line all-cast version (48" or 60" sizes), and special features include a charcoal metallic powdercoat finish, gold zinc-coated hardware and handle for greatest rust resistance and a unique winch-clamp-spreader attachment that replaces top clamp-clevis of standard models. It's easily located to allow winching, clamping, or spreading up to 5,000 lbs. Other features include a 7/8" shackle hole for easy and secure non-binding attachment, a 3/8" chain slot for easy and secure winching and quick slack adjustment (no hook required), a cut-out wedge for "gripping" when spreading, and a quick-tightening wing nut for positioning anywhere on the upright steel bar. To order call 800-284-9840.
48" PN XT-485 $107.99
60" PN XT-605 $110.99
